| Certification: | CE, GMP |
|---|---|
| Condition: | New |
| Customized: | Non-Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
NJP-1200D Automatic Capsule Filling Machine
| One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0) | When the abnormal capsule cannot be separated normally, the medicine powder entering the hole of the lower die is directly sucked into the medicine powder recovery device by the medicine powder recovery device at the filling station, which can effectively recover the medicine powder and avoid loss and waste. |
| Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4) | The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder. |
| The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod. | Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading. |
| Specifications | NJP-1200 D type |
| Maximum yield | 72000 grains/hour |
| machine weight | 1100kg |
| Machine volume | 1180×1000×2140mm (height with automatic powder feeding machine: 2550mm) |
| power supply | 380/220V 50Hz |
| total power | 5.5kw _ |
| Number of holes | 9 holes |
| Vacuum _ | 40 m³/h -0.04 ~ -0.08M P a |
| vacuuming | 24.5 Kpa 210 m³/h |
| compressed air | Air consumption 5 m³/h Pressure 0.3~0.4MPa |
| source of water | Water flow 500L/h 0.1 ~ 0.2MPa |
| water requirements | The water ring vacuum pump and the water tank are recycled, and the water source can be connected externally |
| working noise | ≤ 75dBA _ _ |
| Working temperature | 21°C±3°C |
| working relative humidity | 40-55% |
| Chance | Empty capsule≥99.9% Full capsule≥99.8% |
| Adapt Capsules | 00#-5# capsule |
| Loading accuracy | Western medicine ± 3% Chinese medicine ± 4% |
| Adapt to the filling range | Powder , Granule, Pellet, Tablet |
| special function | Powder collector function |
| Material | 316L stainless steel is used for parts in direct contact with medicines |
| specification | Fully sign cGMP requirements |
){kind=link}