High Speed Empty Capsules Filler Medical Powder Njp-2500 Njp Series Automatic Capsule Filling Machine Encapsulation

• Type: Capsule Filling Machine
• Finished Dosage Form: Capsule
• Precision: High Precision
• Certification: CE, GMP
• Voltage: 380V
• Computerized: Computerized
• Model NO.: NJP-2500C
• Customized: Non-Customized
• Condition: New
• Warranty: 1 Year
• Material: Stainless Steel
• Transport Package: Wooden
• Trademark: zion
• Origin: China
• HS Code: 8474802000
• Production Capacity: 100sets/Month

Product Description

NJP-2500C Automatic Capsule Filling Machine

New Material Hopper

It adopts the disc valve feeding method and is equipped with a vibration device. It solves the problem that the traditional screw feeding device has no fluidity and often fails to feed powders with poor fluidity such as Chinese herbal medicines and proprietary Chinese medicines. Easy to disassemble, easy to replace and clean.

Sowing Rack

 

Driven by guide rail, it has high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. Good stability, orderly seeding, and accurate direction adjustment.

    new turntable 

 One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0)
                           Filling combination                                                                        filling base
 

Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4)

The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder.

 

                        New capsule release mechanism                                     Capsule lock mechanism

The new-type finished capsule discharge mechanism exclusively adopts the capsule plate design, no external air source is required when the finished capsules are discharged, and there is no dust flying during the production process. , strong permanent usability, less wear and tear.

The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod.

                                New suction seat                                                          Clean die hole device

A soft sealing column is installed on the original suction seat, and the balance between the lower mold and the suction seat is automatically adjusted by the soft sealing column during the production process to prevent vacuum leakage and increase the rate of capsule separation.

Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading.

                                                                             Powder Recycler

Negative pressure technology is adopted, and it is equipped with an independent distribution system for powder, which can accurately recover powder and avoid crossover Pollution, the recovered powder can be directly produced again, which is convenient and efficient.

Product Paramenters

Model	NJP-2500C
Maximum Capacity	150000 pcs/hour
Machine weight	1500kg
Machine volume	1190 × 1120 × 2130mm (height with automatic powder feeder: 2750mm)
Power supply	380/220V 50Hz
Total power	8kw
Number of holes	18 holes
Vacuum	63 m³/h -0.04 ~ -0.08M P a
Vacuuming	24.5 Kpa 210 m³/h
Compressed air	Air consumption 6m³/h Pressure 0.3~0.4MPa
Source of water	Water flow 500L/h 0.1 ~ 0.2MPa
Water requirements	The water ring vacuum pump and the water tank are recycled, and the water source can be connected externally
Working noise	≤ 75dBA _
Working temperature	21°C±3°C
Working relative humidity	40-55%
Chance	Empty capsule ≥ 99.9%. Full capsule ≥ 99.8%
Adapt Capsules	00#-5# capsule
Loading accuracy	Western medicine ± 3%. Traditional Chinese medicine ± 4%
Adapt to the filling range	Powder, Granule, Pellet, Tablet
Special function	Powder collector function
Material	316L stainless steel is used for parts in direct contact with medicines
Specification	Fully sign cGMP requirements