| Certification: | CE, GMP |
|---|---|
| Condition: | New |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
NJP-3800D Automatic Capsule Filling Machine
| Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4) | The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder. |
| The new-type finished capsule discharge mechanism exclusively adopts the capsule plate design, no external air source is required when the finished capsules are discharged, and there is no dust flying during the production process. , strong permanent usability, less wear and tear. |
The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod. |
| A soft sealing column is installed on the original suction seat, and the balance between the lower mold and the suction seat is automatically adjusted by the soft sealing column during the production process to prevent vacuum leakage and increase the rate of capsule separation. | Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading. |
|
Model
|
NJP-3800D
|
|
Maximum Capacity
|
228000 pcs/hour
|
|
Machine weight
|
2200kg
|
|
Machine volume
|
1395×1180×2260mm (height with automatic powder feeder:2880mm)
|
|
Power supply
|
380/220V 50Hz
|
|
Total power
|
10.5kw
|
|
Number of holes
|
27 holes
|
|
Vacuum
|
63 m³/h -0.04 ~ -0.08M P a
|
|
Vacuuming
|
24.5 Kpa 210 m³/h
|
|
Compressed air
|
Air consumption 12m³/h Pressure 0.3~0.4MPa
|
|
Source of water
|
Water flow 1000L/h 0.3~0.4Mpa
|
|
Water requirements
|
The water ring vacuum pump and the water tank are recycled, and the water source can be connected externally
|
|
Working noise
|
≤ 75dBA _
|
|
Working temperature
|
21°C±3°C
|
|
Working relative humidity
|
40-55%
|
|
Chance
|
Empty capsule ≥ 99.9%. Full capsule ≥ 99.8%
|
|
Adapt Capsules
|
00#-5# capsule
|
|
Loading accuracy
|
Western medicine ± 3%. Traditional Chinese medicine ± 4%
|
|
Adapt to the filling range
|
Powder, Granule, Pellet, Tablet
|
|
Special function
|
Powder collector function
|
|
Material
|
316L stainless steel is used for parts in direct contact with medicines
|
|
Specification
|
Fully sign cGMP requirements
|
){kind=link}